 | Welcome on Used Pildriver.com! Today is 20 may 2012. Today 20 products are avalaible.
 | PVE Dieseko Vibrator 2316 VM with powerpack PVE500 | |
|---|
| France | PVE Dieseko Vibrator 2316 VM Highfrequent with variable moment year 2005, with univ. clamp and hosepackage (32 meters)
| | Détails |
|
 | SOLD !!!!!! MUELLER MS 100 !!!!! | |
|---|
| France | The unit has been completely overhauled by manufacturer in 2010 at cost of Euro 120`000.
Worked since then just a small jobsite !
| | Détails |
|
 | PVE 105M | |
|---|
| Holland | Vibro PVE105M in good working condition without clamp and pp.
We can propose new powerpack/clamp for this unit if needed. | | Détails |
|
 | PVE 40 VM with PVE 800 Powerpack OVERHAULED !!! | |
|---|
| Holland | Very nice variable moment with high frequency vibro overhauled in 2010
With PVE800 Powerack and 200t universal clamp | | Détails |
|
 | PVE 25M + PVE450 | |
|---|
| France | Very nice PVE 25M vibratory hammer with PVE 450 Powerpack + universal clamp + tube clamps (280 to 2000mm)
This unit is sell with new hoses and complet maintenance.
Starting procedure + training is possible by PAJOT mechanician on site. | | Détails |
|
 | APE VIBRATORY DRIVER EXTRACTOR 200 | |
|---|
| Holland | Built year is 2009, so it is nearly in new state.
For this set we have a sheet clamp as well as caisson clamp available.
This set is working with both a universal sheet clamp (200 tons) and a caisson clamp. We also have a quad clamp available for this vibro (which could also be combined with other vibros); see attached picture as well.
We will sell this vibro with a 6 months warranty.
| | Détails |
|
 | APE MODEL 170 Variable moment | |
|---|
| Holland | Built year of the vibro is 2008, built year of the power unit is 2009. Both are in very good state.
For this set we have a sheet clamp as well as caisson clamp available.
This set is working with both a universal sheet clamp (200 tons) and a caisson clamp.
We will sell this vibro with a 6 months warranty.
| | Détails |
|
 | APE VIBRO model 150 and powerpack 375 | |
|---|
| Holland | This APE Model 150 set is available
Built year of the vibro is is 2007.
Equipment is in very good state.
For this set we have a sheet clamp as well as caisson clamp available.
This set is available with both a universal sheet clamp (200 tons) and a caisson clamp.
We will sell this vibro with a 6 months warranty.
| | Détails |
|
 | APE MODEl 23 | |
|---|
| Holland | This APE J&M Model 23 Vibro is currently without power unit, which can be supplied new in case required.
Required flow: 105 - 125 l/min.
Sheet clamps are integrated in the vibro.
Built year 2008, in good working condition.
We will sell this vibro with a 6 months warranty. | | Détails |
|
 | APE VIBRATORY DRIVER EXTRACTOR 200-6 T | |
|---|
| Holland | This APE Model 200-6 T set is built in 2008 and is in very good condition. Working hours of the power unit is about 600 hours.
This set is working with both a universal sheet clamp (200 tons) and a caisson clamp. We also have a quad clamp available for this vibro (which could also be combined with other vibros
We will sell this vibro with a 6 months warranty. | | Détails |
|
 | APE VIBRATORY DRIVER EXTRACTOR 200-6 | |
|---|
| Holland | This APE Model 200-6 is built in 2005. The running hours of the power unit is about 1500 hours.
The set is currently working with a universal sheet clamp (200t. clamp force), though a caisson clamp system can also be delivered of course.
The set is in good working condition; the vibro was refurbished in 2009.
In case of sales, we will provide a 6 months warranty | | Détails |
|
 | ICE 8514 + PWP ICE780 + Tube and Univers. clamp | |
|---|
| France | 1 ICE 8514 vibratory
1 POWERPACK 780 with CAT3412 engine
1 Tube clamp
1 universal clamp
1 pile clamp 580 x 580
In working condition
Powerpack revised with new cooloing system | | Détails |
|
 | PVE 2306 with PVE DWK48T Clamp NEW !!!! | |
|---|
| Holland | Excavator mounted vibratory hammer NEW
Working hours: none
Build year: 2009
Quality: new
Colour: red | | Détails |
|
 | ICE 328B excavator mounted vibrator | |
|---|
| France | Vibro in very good condition
Make: International Construction Equipment ( ICE)
Model: 328B
Year: 1998
Eccentric Moment Kgm: 3.2
Max Frecuency rmp: 2800
Max centrifugal force KN: 275
Max line pull capacity KN: 120
Max hidraulic power: KW/HP: 65/68
Max oil flow L/min: 110
Total weight kgr: 1090
Max amplitude mm: 8.6
L x W x H: 1128 x 520 x 1416
Recomendaded clamp: 40 TU
Very good condition. | | Détails |
|
 | HH 357 BSP IMPACT HAMMER | |
|---|
| France | Very nice hammer MK V HH3579 near new, 721h working hours.
Max. Energy 83 kN.m
With modular ram weight 3, 5 and 7 tons
1 new remote control
1 new monitoring system
1 spreader plate with can for 813 mm tubes maxi.
1 spreader and legs for drive standard sheetpiles
1 manifold for use with existing hydraulic power source e.g. crawler crane
YOM 1992 and overhauled in 2002 by BSP
| | Détails |
|
 | HAMMER DKH 10L PILEMER | |
|---|
| Uruguay | 1 Hydraulic hammer DKH10L
1 Powerpack Pilemer DKH-160 with 6CTA8 Cummins engine
1 Cap for 1100 mm tube max.
1 Complete spare parts box
in good working condition.3C
| | Détails |
|
 | 1400 air impact hammer | |
|---|
| France | Very good condition (as new)
can drive sheet pile, tubes, H beam, etc...
More info and vidéo on www.pajot.com
| | Détails |
|
 | PAJOT 600 AIR HAMMER | |
|---|
| France | PAJOT Air Hammer 600
Completly overhauled, same warranty than new
Sheetpiles, tubes, H beam guide available.
Contact us contact@used-piledriver.com
| | Détails |
|
|
|
